Saint-Gobain Sealsâ€™ OmniSealÂ® spring-energized seals have been qualified as a sealing solution in various sections of rotorhead in military helicopters.
Online PR News – 15-August-2014 – Garden Grove, CA – Saint-Gobain Sealsâ€™ OmniSealÂ® spring-energized seals have been qualified as a sealing solution in various sections of rotorhead in military helicopters. Within this dynamic rotorhead application, four seals have been qualified for sealing purposes, including sealing the inboard pitch-varying housing, outboard pitch-varying housing, vertical hinge pin and horizontal hinge pin. This recent qualification acts a system solution complement to their OmniLipÂ® lip seals, which perform sealing in helicopter gearboxes.
The rotor system or the rotary-wing assembly is an externally visible, rotating part of a helicopter responsible for generating lift. This system consists of a mast, a hub and rotor blades. The rotor blades are connected to one end of the hollow, cylindrical mast at the point of attachment called the hub. The hub, also referred to as the rotorhead, consists of pitch-varying shafts attached to it by horizontal hinge pins. Pitch-varying housings are mounted over these pitch-varying shafts. The rotor baldes are attached to the pitch-varying housings by vertical hinge pins. On the other end, the mast is connected to transmission and gearboxes. This assembly of various parts in the rotor system receives torque from the transmission and translates into rotary motion of the helicopter blades. As the mast rotates at hundreds of rpm during a powered flight, it is very important that seals located at various positions of the rotary system prevent oils and greases from leaking and contaminants such as ice, water and dirt from coming in. Loss of lubrication can lead to catastrophic failures; hence, seals have to be able to be capable of dry running in such events.
All above four seals share a unique design customized to meet key requirements such as dry running and are a special type of Saint-Gobain Sealsâ€™ product family of OmniSealÂ® spring-energized seals, which are widely used in critical environments. The outside sealing jacket is made from a proprietary FluoroloyÂ® material that combines the excellent frictional and wear characteristics of PTFE with flexibility and elasticity of thermoplastic elastomers. This PTFE material blended with thermoplastic elastomer ensures optimum chemical compatibility with various lubricating oils per MIL-L-2105 and MIL-L-21260 as well as greases per MIL-G-23827 and MIL-G-81322 specifications. The seal utilizes a wrapped and formed OmniSealÂ® RP II ribbon spring design which offers the utmost spring deflection for otherwise difficult sealing applications. This rugged seal encased by an anodized aluminum casing works under the most severe mechanical conditons when other designs fail. The aluminum casing ensures lightweight as well as simple press-fit installation in the seal housing. As the helicopter covers a wide range of environment and landscape, these seals handle temperatures ranging from -67Â°F (-55Â°C) up to 200Â°F (93Â°C).
The OmniSealÂ® product line is available in multiple designs such as 103A, APS, Spring Ring II, 400A, RP II and RACOâ„¢ 1100A and are also offered in various custom designs. These designs include seal jackets in various FluoroloyÂ® materials and springs in various configurations. Saint-Gobain Sealsâ€™ sealing solutions have been used in launch vehicles such as the Atlas V rocket engine (which launched the Mars Rover Curiosity into space), Delta IV Heavy rocket and Falcon 9 rocket. Their solutions have also been used in other industries (oil and gas, automotive, life sciences, electronics and industrial) and in applications such as environmentally-friendly industrial dyeing process equipment, high-speed surgical tools, the worldâ€™s first subsea gas compression station and deicing systems.
Please contact Saint-Gobain Seals at email@example.com for assistance with unique applications or visit their website, http://www.seals.saint-gobain.com for more information on spring-energized seals.
About Saint-Gobain Seals (www.seals.saint-gobain.com)
Saint-Gobain Seals is a business unit under Saint-Gobain Performance Plasticsâ€™ Engineered Components division; our parent company is one of the worldâ€™s top 100 industrial groups. With more than 50 years of manufacturing experience and an established global presence (with strategic sites in Garden Grove, California, USA; Belgium, Kontich; and Minhang, Shanghai, China), we offer a diverse range of innovative sealing and polymer solutions:
â€¢ OmniSealÂ® Springâ€“Energized Seals
â€¢ OmniLipâ„¢ PTFE Rotary Shaft Seals
â€¢ OmniFlexâ„¢ Fluoroelastomer Seals
â€¢ RulonÂ® High-Performance Fluoropolymer Compounds
â€¢ MeldinÂ® 7000 Thermoset Polyimide Materials
â€¢ MeldinÂ® HT High-Performance Thermoplastic Materials
Other products include FluoroloyÂ® (high-performance custom-formulated compounds and alloys), cup seals, hydraulic seals, metal seals, v-packings, piston rings, MarathonÂ® (valves and vacuum pump diaphragms), TransbandÂ® (PTFE creepage band), custom parts, polymer bearings and stock shapes.
The majority of seals and polymer components manufactured are custom designed and matched with the best materials to optimize their performance in various applications and markets.