Using air brick is another way of controlling moisture. These are bricks have holes on them that allow free air-flow through the pores to quickly dry out the wetness on the inner layers. But, choosing the right air brick is very essential for the success of the project.
Online PR News – 19-April-2014 – Kowloon/Montgomeryville – Any building’s strength depends on the way it is ventilated besides other factors. It protects the building envelope by controlling moisture that is settled inside the brickwork. When moisture trapped between bricks goes unnoticed, gradually mosses develop to damage the structure of the building. In order to avoid such damages, builders are very keen on ventilating apartments and buildings properly. Construction of houses using bricks not only brings strength to the building, but also enhances the appearance of the structure. More importantly, outside noise levels are kept from penetrating into the house and bricks serve as a shield to block termites from entering.
Lloyd Industries of Florida recommends brick masonry as superior to many other methods due to its durability. Even in the past, massive palaces and forts were constructed with bricks and ever since, they are being viewed as a thing of beauty. However if the brickwork is not well taken care of during stormy weather, dampness starts spreading inside the structure causing havoc. Creating weep holes at the bottom of the brick walls is one option to control moisture spreading. These holes are spaced equally to allow sufficient air to pass through. However, in this modern time where people are more concerned about appearance than safety, weep holes give an impression of mortar missing in some areas and thereby appearance getting compromised. Also, due to the size of weep holes, there are chances for insects to crawl into the house.
Though buildings and commercial properties need to be built air-tight, they should also provide enough breathing room. Brick vents are much more stable solution than weep holes as they supply enough passage for air to pass in and out and thus, dry out the moisture deposited inside brick walls. Since, it is not that difficult to match the size of the brick vents to the size of the bricks already forming the wall, the formation of unsightly holes can be carefully avoided. So the aesthetic appearance does not get tampered with. More importantly, since the purpose of weep holes is only for ventilation, they become useless if mortar dropping fill-up the areas, whereas brick vents do not encounter such situations.
Using air brick is another way of controlling moisture. These are bricks have holes on them that allow free air-flow through the pores to quickly dry out the wetness on the inner layers. But, choosing the right air brick is very essential for the success of the project. This particular building material is sturdier than many other. Using air bricks in a construction project may look simple, but if they are blocked accidentally, they pave ways for more damage than the regular bricks and quicker.
To know the latest models of brick vents in the market visit www.firedamper.com